Specifications

SSR Command Line Interface Reference Manual 159

dhcp define pool

Purpose

Define a pool of IP addresses to be used by DHCP clients.

Format

dhcp <scope> define pool <ip-range>

Mode

Configure

Description

The dhcp define pool command allows you to define a pool of IP addresses that can be

used by DHCP clients. An IP address pool, along with a set of parameters defined with

the dhcp define parameters command, make up a DHCP “scope”.

Parameters

<scope>

A name that refers to the specified pool of addresses.

<ip-range>

The range of IP addresses to be used by the clients. Use a hyphen (-) to designate the

range. If you have more than one pool of IP addresses to specify or if the addresses are

not contiguous, specify additional addresses using multiple dhcp define pool

commands.

Restrictions

None.