Specifications

SSR Command Line Interface Reference Manual 155
Chapter 10
dhcp Commands
The dhcp commands allow you to configure scopes (sets of IP address pools and network
parameters) that are to be used by Dynamic Host Configuration Protocol (DHCP) clients
and apply them to interfaces on the SSR.
Command Summary
Table 7 lists the dhcp commands. The sections following the table describe the command
syntax.
Table 7. dhcp commands
dhcp <scope> attach superscope <superscope>
dhcp <scope> define parameters <parameter> <value>
dhcp <scope> define pool <ip-range>
dhcp <scope> define static-ip <ipaddr> mac-address <macaddr> [<parameter> <value>]
dhcp flush
dhcp global set commit-interval <hours>
dhcp global set lease-database <url>
dhcp show binding [active|expired|static]
dhcp show num-clients