Specifications

SSR Command Line Interface Reference Manual 151
To copy the file config.john to config.debi:.
To copy the Startup configuration to a TFTP server for backup purposes, enter the
following command. The CLI prompts for the TFTP server’s IP address or hostname and
the filename:
To copy a previously saved configuration from a TFTP server to the Startup configuration,
enter the following command. Note the use of an URL to specify the TFTP server and the
filename.
To copy the active configuration to a remote server using RCP, enter the following
command. Notice that in this example a URL specifies the RCP user name, server, and
filename.
To copy the startup configuration of the primary Control Module to the secondary Control
Module:
ssr# copy config.john to config.debi
ssr# copy startup to tftp-server
ssr# copy tftp://10.1.2.3/backup/config.org to startup
ssr# copy active to rcp://john@server1/config/config.dec25
ssr# copy startup to backup-CM