Specifications

SSR Command Line Interface Reference Manual 137
bgp trace
bgp trace
Purpose
Set BGP trace options.
Format
bgp trace [packets|open|update|keep-alive [detail|send|receive|[group <number>
[peer-host <ipaddr>]]] [aspath] [local-options
all|general|state|normal|policy|task|timer|route]
Mode
Configure
Description
The bgp trace command lets you set BGP trace options for the SSR.
Parameters
packets Traces all BGP packets.
open Traces BGP OPEN packets, which are used to establish a peer
relationship.
update Traces BGP update packets, which are used to pass network reachability
information.
keep-alive Traces BGP KEEPALIVE packets, which are used to verify reachability.
detail Shows detailed information about the specified packets.
send Shows the specified packets sent by the router.
receive Shows the specified packets received by the router.
local-options Sets trace options for this protocol only. You can specify the following:
aspath Traces aspath related events.