Specifications

SSR Command Line Interface Reference Manual 131
bgp show routes
bgp show routes
Purpose
Displays entries in the BGP routing table.
Format
bgp show routes <ip-addr-mask>|all [to-terminal|to-file]
Mode
Enable
Description
The bgp show routes command displays the IP address/netmask, next hop, and AS path
for each BGP route.
Parameters
<ip-addr-mask> Displays information about the specified route.
all Displays information about all routes.
to-terminal Causes output to be displayed on the terminal. This is the default.
to-file Causes output to be saved in the file /gatedtrc/gated.dmp.
Restrictions
None.