Specifications

SSR Command Line Interface Reference Manual 121
bgp show cidr-only
bgp show cidr-only
Purpose
Display routes in the BGP routing table with CIDR network masks
Format
bgp show cidr-only <ip-addr-mask>|all [to-terminal|to-file]
Mode
Enable
Description
The bgp show cidr-only command displays the same type of route information as the bgp
show routes command. The difference is that the bgp show cidr-only command limits the
display to CIDR routes only.
Parameters
<ip-addr-mask> Displays information about the specified CIDR route.
all Displays information about all CIDR routes.
to-terminal Causes output to be displayed on the terminal.
to-file Causes output to be saved in the file /gatedtrc/gated.dmp.
Restrictions
None.
Example
To display information all CIDR routes in the SSR’s BGP route table: