Specifications

SSR Command Line Interface Reference Manual 103
bgp create peer-group
routing An internal group which uses the routes of an interior protocol to
resolve forwarding addresses. Type routing groups will determine the
immediate next hops for routes by using the next hop received with a
route from a peer as a forwarding address, and using this to look up an
immediate next hop in an IGP’s routes. Such groups support distant
peers, but need to be informed of the IGP whose routes they are using to
determine immediate next hops. This implementation comes closest to
the IBGP implementation of other router vendors.
autonomous-system
Specifies the autonomous system of the peer group. Specify a number from 1 –
65534.
proto Specifies the interior protocol to be used to resolve BGP next hops. Specify one of
the following:
any Use any igp to resolve BGP next hops.
rip Use RIP to resolve BGP next hops.
ospf Use OSPF to resolve BGP next hops.
static Use static to resolve BGP next hops.
interface <name-or-IPaddr>
Interfaces whose routes are carried via the IGP for which third-party next hops
may be used instead. Use only for type ROUTING group. Specify the interface or
all for all interfaces.
Restrictions
None.