Specifications

2-48 SmartSwitch 6500 Reference Manual
Console Commands
ClientVC
Use ClientVC to display VCs associated with ARP mappings cached by LANE or IP/ATM clients on the switch.
ClientARP is similar to ClientVC but does not show the VPI/VCI corresponding to a route to a destination client.
2p›F Clients on the switch are called local clients.
Operator
show
Parameters
Input Parameter Description Value/Field Size Default
[ClientNumber] Number of the local client. 0-127 or All All
Output Parameter Description
[MAC Address] MAC address of the LANE destination client.
[IP Address] IP address of the IP/ATM destination client.
[VPI/VCI] VPI/VCI values of control direct VCC or multicast Send VCC to the destination client.
[ATM Address] ATM address of the LANE or IP/ATM destination client.