Specifications

SmartSwitch 6500 Reference Manual 2-269
SSCOPStatistics
Use SSCOPStatistics to display SSCOP statistics of a port or all ports.
2p›F You can hot-swap TSMs. Hot-swapping is replacing a module when the chassis is
powered up. If you replace a TSM with another TSM of the same type (same I/O
ports), existing configuration of port parameters is not affected. This includes
parameters set using any of the following attributes: ATMRoute,
CACServiceClassBw, IlmiConfig, NetPrefix, Port, PortConfig, PVC, PVP,
ServiceRegistry, SigTimer, SigStatistics, SSCOPConfig, and SSCOPStatistics. If
you replace a TSM with another TSM of a different type, existing configuration
of port parameters is deleted. The deletion occurs when the new module is plugged
into the chassis backplane.
Operators
show
Parameters
Input Parameter Description Value/Field Size Default
[PortNumber] Port number on the switch. 1A1 to 8B4 (for physical ports),
1A1.n to 8B4.n (for virtual ports),
or All
All
Output Parameter Description
Q+œÀÍ›R +œÀÍʘ֓LiÀÊœ˜ÊÍ…iÊÃ݈ÍV…°
Q!Ö“Ê*.57!Ê0À>˜Ã“ˆÍÍi`R !Ö“LiÀÊœvÊ*.57!Ê+-2ÃÊÍÀ>˜Ã“ˆÍÍi`°
Q!Ö“Ê*.57!Ê-iViˆÜi`R !Ö“LiÀÊœvÊ*.57!Ê+-2ÃÊÀiViˆÜi`°
Q!Ö“Ê*.57!Ê-iÍÀ>˜Ã“ˆÍÊ0À>˜Ã“ˆÍÍi`R !Ö“LiÀÊœvÊ*.57!ÊÀiÍÀ>˜Ã“ˆÍÊ+-2ÃÊÍÀ>˜Ã“ˆÍÍi`°
Q!Ö“Ê*.57!Ê-iÍÀ>˜Ã“ˆÍÊ-iViˆÜi`R !Ö“LiÀÊœvÊ*.57!ÊÀiÍÀ>˜Ã“ˆÍÊ+-2ÃÊÀiViˆÜi`°
Q!Ö“Ê*.57!Ê"+=Ê0À>˜Ã“ˆÍÍi`RÊ !Ö“LiÀÊœvÊ*.57!"+=Ê+-2ÃÊÍÀ>˜Ã“ˆÍÍi`°Ê