Specifications

SmartSwitch 6500 Reference Manual 2-1
2 CONSOLE COMMANDS
622LoopBack
Use 622LoopBack to set or display loopback on 622 Mbps (OC-12/STM-4) ports. ÊÊ
2p›F A port in loopback mode does not pass normal traffic.
Operators
modify, show
Parameters
Input Parameter Description Value/Field Size Default
[PortNumber] Port number on the switch. 1A1 to 8B4 No default
[Loopback] Loopback mode (see Table 2-1). None, Facility, Equipment, Diag None
Output Parameter Description
[PortNumber] Physical port number on the switch.
[Type] Type of port.
[Loopback] Loopback mode. Possible values are None, Facility, Equipment, or Diag (see Table 2-1).