Specifications

Application Views Fore Software Application (ForeSoftWreApp)
Device Management Page 99 ForeRunner ATM Switch Modules
AssignedVPI
The VPI assigned at the Called NI for this party.
The value is only meaningful if the party status is
up.
AssignedVCI
The VCI assigned at the Called NI for this party.
This value is only meaningful if the party status is
up.
Status
Operational status of this party in the PMP
SPVCC. Possible values are up, down, and
connecting.
LastFailCause
The last setup failure cause code for this party.
PMP SPVCC Destination Party
Table View
Access: From the PNNI SPVC/SPVCP Configuration
view, click on the PMP SPVCC Dest Party button.
This table contains information about the parties
of PMP SPVCCs that terminate at this switch.
ATM Address
The ATM address of the switch where this party of
a PMP SPVCC terminates.
Port
Identifies the port where this party of a PMP
SPVCC terminates. It has a value of -1 if the port
at the destination switch cannot be determined.
AssignVPI
The VPI assigned for this party of a PMP SPVCC at
the terminating switch. This value is only
meaningful if the party status, identified by
Status is up.
AssignVCI
The VCI assigned for this party of a PMP SPVCC
at the terminating switch. This value is only
meaningful if the party status, identified by
Status is up.
Uptime
The time since this party of PMP SPVCC was
created in hundredths of a second.
Transit
The optional transit network selection for this
party of PMP SPVCC.
Status
The operational status of this party of PMP
SPVCC. Possible values are up, down, and
failed.