Specifications

Application Views Fore Software Application (ForeSoftWreApp)
Device Management Page 98 ForeRunner ATM Switch Modules
Port
Identifies the port of this terminating PMP SPVCC
at the source end. It has a value of -1 if the port at
the destination switch cannot be determined.
VPI
The VPI used for the PVCC portion of the
connection at the root of the PMP SPVCC. The
root switch is identified by ATM Address.
VCI
The VCI used for the PVCC portion of the
connection at the root of the PMP SPVC. The root
switch is identified by
pnniPmpSpvccDestRootEntry.
Bearer Class
The broadband bearer class signalled for the first
party of this PMP SPVCC. All subsequent parties
should have the same value.
SusceptClip
The broadband susceptibility to clipping signalled
for the first party of this PMP SPVCC. All
subsequent parties should have the same value.
Possible values are no and yes.
FwdQoSClass
The requested quality of service for this PMP
SPVCC in the forward (from root to leaves)
direction. Backward QoS requirements do not
apply to PMP SPVCCs. Possible values are
class0, class1, class2, class3, and class4.
NoOfParties
Number of parties currently terminating at this
switch within this PMP SPVCC.
PMP SPVCC Source Party Table
View
Access: From the PNNI SPVC/SPVCP Configuration
view, click on the PMP SPVCC Src Party button.
ATM Address
The ATM address of the distant end NI (remote
switch) for this party.
VP/VCSel
The Called VPI/VCI value selection qualifier.
Possible values are noPref and require.
VPI
The VPI to be used at the Called NI for this party.
VCI
The VCI to be used at the Called NI for this party.
Name