Specifications

Application Views Fore Software Application (ForeSoftWreApp)
Device Management Page 97 ForeRunner ATM Switch Modules
PMP SPVCC Source Table View
Access: From the PNNI SPVC/SPVCP Configuration
view, click on the PMP SPVCC Source button.
This table contains information about the root
side of PMP SPVCC that have their source at this
switch. It also contains the connection
parameters that are common to all the parties.
Port
Identifies the input port of this PMP SPVCC and is
the same as the chanrInputPort, chanPort,
pathPort, and portNumber.
VPI
The VPI to be used at the Calling (root) NI for this
PMP SPVCC.
VCI
The VCI to be used at the Calling (root) NI for this
PMP SPVCC.
Name
The name of the
FwdUPCKey
The forward UPC traffic contract key for this PMP
SPVCC. This key must be defined in the UPC
Contract Table. Backward UPC traffic does not
apply to PMP service.
BearerClass
The requested broadband bearer class for this
PMP SPVCC.
SusceptClip
The requested broadband bearer susceptibility for
this PMP SPVCC.
FwdQOSClass
The requested quality of service for this PMP
SPVCC in the forward (calling to called) direction.
Backward direction does not apply to PMP
SPVCCs.
Status
The operational status of this PMP SPVCC.
Possible values are up, down, and wait.
PMP SPVCC Destination Table
View
Access: From the PNNI SPVC/SPVCP Configuration
view, click on the PMP SPVCC Dest button.
ATM Address
The ATM address of the root of the PMP SPVCC
that has one or more parties terminating at this
switch.