Specifications

Application Views Fore Software Application (ForeSoftWreApp)
Device Management Page 94 ForeRunner ATM Switch Modules
Calling Domain
The domain ID to be used at the Calling NI.
Last Fail Cause
The cause of the last call setup failure.
Last Location
The last call setup failure location code for this
SPVC. This indicates the switch that initiated the
clearing for the call. This is formatted as a test
string with the fields:
Qos Index
The index for the QOS Class Expansion Table to
be used for this SPVC.
Backoff Status
The status of the backoff function for this SPVC.
If set to disabled, directed dtls configured for this
SPVC will be continually retried on failure.
Priority
The priority of this SPVCC for connection.
Old Route Cost
This is specified only to be included in the
pnniSpvcUp trap. It specifies the path cost of the
call the previous time this call was up. If the call
has not been up, this will report a value of -1.
Down Reason
This is specified only to be included in the
pnniSpvccDown and pnniSpvccFail traps. This
specifies whether the SPVC call was cleared due
to a better route being found, a network failure, or
SPVC deletion.
Active Dtl Node Index
The Node index of the Active Designated Transit
List for this SPVC. The active DTL indexed by the
node index and DTL index identifies the DTL that
is currently used by the SVC portion of the SPVC.
The value of this object is 65535 for FTPNNI
nodes.
Table 27: Last Call Setup Failure Location
Value Definition
FMT Diagnostic format
RMT Indicates whether a remote
switch is the source of
failure or this switch
inserted the location diag.
LINK Link ID that clear pertains
to.
VPI VPI that clear pertains to.