Specifications

Application Views Fore Software Application (ForeSoftWreApp)
Device Management Page 92 ForeRunner ATM Switch Modules
In Port
The Input port of this SPVC.
In VPI
The Input VPI for this SPVC.
In VCI
The Input VCI for this SPVC.
Dst Port
The port of this SPVC at the destination end.
VPI/VCI Sel
The Called VPI/VCI value selection qualifier.
Called VPI
The VPI to be used at the Called NI for this SPVC.
Called VCI
The VCI to be used at the Called NI for this SPVC.
PNNI SPVC Source Table Detail
View
Access: From the PNNI SPVC Source Table, double-click
on an entry value.
Index
The value of this object uniquely identifies the
SPVCs that have this switch as their source.
Calling Port
The input port of this SPVC, and is the same as
the chanrInputPort, chanPort, pathPort, and
portNumber.
Calling VPI
The VPI to be used at the Calling NI for this SPVC.
Calling VCI
The VCI to be used at the Calling NI SPVC.
Called ATM Addr
The ATM address of the distant end NI (remote
switch) for this SPVC.
Called Port
Identifies the port of this SPVC at the destination
end. It has a value of -1 if the port at the
destination switch cannot be determined.
Called VPVC Sel
The Called VPI/VCI value selection qualifier.
Called VPI
The VPI to be used at the Called NI for this SPVC.
Called VCI
The VCI to be used at the Called NI for this SPVC.
Called Assigned VPI
The VPI assigned at the Called NI for this SPVC.
This value is only meaningful if the SPVC status
is up.