Specifications

Application Views Fore Software Application (ForeSoftWreApp)
Device Management Page 87 ForeRunner ATM Switch Modules
the number of 25ns clock cycles that occur
between increments of the Time and Interrupt
Timer Registers. Increasing the Time Scale Factor
increases the burst tolerance that can be
represented by the policer (in multiples of .838
seconds) while reducing the precision of the
policer by a similar factor.
Debug
Indicates whether or not debugging services are
available via TCP port 6532 for this switch.
McastMode
Identifies the mode in which this ATM switch
board is operating. Extended-mode provides
greater flexibility when selecting VCI for point to
multipoint connections. Non-extended (mixed)
mode is more restrictive. If any series A or B
netmodes are present, the switch board should
operate in non-extended mode.
FingerMode
Possible values are enabled or disabled.
Topology - Board Link Table View
Access: From the Topology Configuration View, click the
Board Links button.
Board Topology
Board
The index of this switch board within the ATM
switch cluster.
Inter-Sw Links
The current number of inter-switch links known
by this switch board.
Board Link Table
Board
The index of this switch board within the ATM
switch cluster.
Source
The ATM address of the source switch of this link.
Destination
The ATM address of the destination switch of this
link.
Capacity
The free capacity of this link in kilobits per
second.