Specifications

Application Views Fore Software Application (ForeSoftWreApp)
Device Management Page 81 ForeRunner ATM Switch Modules
Channel Routes of Selected Port
View
Access: Within the ATM Switch Software Port Detail
View, click the Channel Routes of this Port button.
Information about the routing of channels
through this ATM switch.
In Port
Identifies the input port of this channel and is the
same as the chanPort, pathPort, and portNumber.
In VPI
The input VPI of this channel and is the same as
the chanVPI, and pathVPI.
In VCI
The input VCI of this channel, it is the same as
chanVCI.
Out Port
The output port of this channel. It is the same as
the opathPort, and the portNumber.
Out VPI
The output VPI of this channel. It is the same as
the opathVPI.
Out VCI
The output VCI of this channel.
Status
The status of this channel entry.
Protocol
The signaling protocol that created this channel.
Name
The name that has been assigned for this
channel.
ConnType
The type of channel endpoints with respect to a
particular network.
Paths In Table View
Access: From the Software Switch Configuration view,
click on the Paths In button.
In Port
Identifies the input port of this path.
In VPI
The input VPI of this path.
Status
The status of this path entry.
NumOutputs
The number of output ports to which this path is
routed.