Specifications

Application Views Fore Software Application (ForeSoftWreApp)
Device Management Page 80 ForeRunner ATM Switch Modules
Status
The status of this path entry.
NumOutputs
The number of output ports to which this path is
routed.
MaxChans
The maximum number of virtual channels that
can be allocated on this path.
NumChans
The number of virtual channels currently
allocated on this path.
Max B/W
The maximum bandwidth of this path, in cells per
second.
Alloc B/W
The allocated bandwidth of this path, in cells per
second.
Cells
The number of cells transferred over this path.
Uptime
The time since this path was created, in
hundredths of a second.
Protocol
The signaling protocol that created this path.
Rejected
The number of cells over this through path that
were rejected (dropped) by the policer on the
switch fabric. This does not include any cells that
may have been tagged with CLP=1 by the policer,
only cells that were discarded.
LoopVPI
If this value is other than -1, cells destined for
pathrOutput, pathrOUtputVPI will be translated
by the netmod to pathrLoopVPI before actually
being transmitted. This was instituted to facilitate
single port loopback.
UPCcontr
The UPC contract that will be used to police this
through path. This is the number of the row in
the Contract Table.
Name
The name that has been assigned for this path.
ConnType
The type of the path endpoints with respect to a
particular network.