Specifications

Application Views Fore Software Application (ForeSoftWreApp)
Device Management Page 74 ForeRunner ATM Switch Modules
Output Max CTD
This variable gives the maximum Cell Transfer
Delay that is being attributed to the output side of
the port. The value can be either user specified or
a hardware dependent system default value.
Management Status
The visibility of this port in the management
station’s view. The default value is 1.
AIS RDI Generation
The port ATM layer AIS and Receiver Data
Interface (RDI) generation status, either enabled
or disabled.
Opens the Paths of Selected Port View (Page 74).
Opens the Additional Detail View (Page 75).
Opens the Port Performance View.
Opens the Path Routes of Selected Port View
(Page 79).
Opens the Channel Routes of Selected Port View
(Page 81).
Paths of Selected Port View
Access: Within the ATM Switch Software Port Detail
View, click the Paths of this Port button.
Path Table
A table of information about the virtual paths
passing through this ATM switch.
In Port
The input port of this path.
In VPI
The input VPI of this path.
Status
The status of this path entry.
NumOutputs
The number of output ports to which this path is
routed.
MaxChans
The maximum number of virtual channels that
can be allocated on this path.
NumChans
The number of virtual channels currently
allocated on this path.
Paths of this Port
Additional Detail
Port Performance
Path Routes of this Port
Channel Routes of this Port