Specifications

Application Views Fore Software Application (ForeSoftWreApp)
Device Management Page 73 ForeRunner ATM Switch Modules
CDV Tolerance
The Cell Delay Variation (CDV) tolerance
associated with this physical port. Connections
take their default value for tis from the input side
port.
Remote ATM Address
The ATM address of the entity connected to this
port.
Remote IP Address
The IP address of the entity connected to this
port.
ILMI Remote IP Address
The IP address of the entity connected to this port
that was discovered using ILMI on path 0. If there
is no q2931 signaling path on VPI 0 that uses
ILMI, the value of this object is
255.255.255.255.
Max Paths In
The maximum number of incoming virtual paths
supported by this port.
Num Paths In
The number of incoming virtual paths on this
port.
Max Paths Out
The maximum number of outgoing virtual paths
supported by this port.
Num Paths Out
The number of outgoing virtual paths on this
port.
Input CDV
The current value of Cell Delay Variation
attributed to the input side of this port, which can
be either a user specified value or the system
default, as determined by the setting of
InputCDVmode.
Input Max CTD
This variable gives the maximum Cell Transfer
Delay that is being attributed to the input side of
this port. The value can be either user specified or
a hardware dependent system default value.
Output CDV
If the port out put delay mode equals
userSpecified then this variable contains the
constant amount of Cell Delay Variation that is
being attributed to this output port. If
portOutputDelay mode equals systemDefault
then an actual value for the CDV experienced by
connections traversing this port is being
calculated. In this case the value of this variable
is meaningless since CDV can only be calculated
on a per-connection basis.