Specifications

Application Views Fore Switch Application (ForeSwitchApp)
Device Management Page 68 ForeRunner ATM Switch Modules
ConnectedPDefaultAddress
The connected party address to be used in
Connection Acceptance messages that do not
contain Connected party addresses.
SubaddressingAdminStatus
Allows you to enable or disable the sub-
addressing capability. If this is set to enable, the
called party sub-address IE is passed along. If
this is set to disable, this IE is removed while
forwarding the messages. The value of undefined
is a read-only value used for interfaces where
supplementary services are not applicable.
UserUserSignallingAdminStatus
Used to enable or disable the User to User
Signaling capability. If this is set to enable, the
UUS IE is passed along. If this is set to disable,
this IE is removed while forwarding the messages.
The value of undefined is a read-only value used
for interfaces where supplementary services are
not applicable.
PnniRccVci
Used to specify the PVC RCC VCI used by the
PNNI. Normally this will always be 18, but if a
user creates a VPT with a VCI range that does not
contain 18, then this field is used to specify the
PNNI PVC RCC VCI.
Q2931 Statistics Table View
Access: Within the Software Switch Configuration view,
click the Q2931 Stats button.
This table contains the following fields.
Port
The port for this signaling path.
VPI
The VPI of this signaling path.
VCC (Virtual Channel Connections)
The VCC of this signaling path.
Restarts
The number of times this switch has lost and
regained contact with the remote signaling entity
on this path.
Call Completions
The number of successful call completions for
this signaling path.
Call Failures
The number of call failures for this signaling path.
Call Rejections
The number of connections on this path that were
rejected by the far end.