Specifications

Application Views Fore Switch Application (ForeSwitchApp)
Device Management Page 67 ForeRunner ATM Switch Modules
Supplem Services Status
The supplement services status.
Calling PAddress Presentation
The Calling party address presentation can be set
to one of the two values as described above. This
is used when this interface is acting as a calling
party of a call setup message. When set to enable,
while a call setup message is forwarded through
this interface, the calling party number is
provided. When set to disable, the calling party
number is not provided in the call setup message.
The value of undefined is a read-only value used
for interfaces where supplementary services are
not applicable.
Calling PAddress Restriction
The Calling party address restriction can be set to
one of the two values as described previously.
This variable is used when this interface is acting
as a calling party for a call setup message. When
set to enable, while a call setup message is
received from this interface and forwarded out,
the calling party number is not provided to called
user. When set to disable, the calling party
number is provided to the called user. The value
of undefined is a read-only value used for
interfaces where supplementary services are not
applicable.
ConnectedPAddressPresentation
The Connected party address presentation can be
set to one of the two values as described
previously. Tis variable is used when the interface
is acting as a calling party to a call setup
message. When set to enable, while a call
establishment response message is forwarded
through this interface, the connected party
number is provided to the calling user. When set
to disable, while a call establishment response
message is forwarded through this interface, the
connected party number is not provided to the
calling user. The value of undefined is a read-only
value used for interfaces where supplementary
services are not applicable.
ConnectedPAddressRestriction
The Connected party address restriction can be
set to one of the two values as described above.
This variable is used when the interface is acting
as a called party to a call setup message. When
set to enable, while a call establishment response
message is forwarded from this interface, the
connected party number is not provided to the
calling user. When set to disable, while a call
establishment response message is forwarded
from this interface, the connected party number
is provided to the calling user. The value of
undefined is a read-only value used for interfaces
where supplementary services are not applicable.