Specifications

Application Views Fore Switch Application (ForeSwitchApp)
Device Management Page 66 ForeRunner ATM Switch Modules
Q2931 Administration Table
Additional Detail View
Access: From the Software Switch Configuration View,
click the Q2931 Admin button.
Max VPI
The maximum configured VPI that is used for
SPVs when this interface sets up SPV
Connections and also the Max VPI that is used to
create dynamic paths for SVCs connections.
Max Svcc VPI
The maximum actual VPI that will be used for
SVCs dynamic paths. This variable denotes the
operating value for the maximum VPI value that
can be used for setting up dynamic path SPVs.
The operating value can differ from the configured
value (Max VPI) as the operating value depends on
the outcome of possible ILMI based VPI range
negotiation procedure.
Max Svpc VPI
The maximum actual VPI that will be used for
SVPs. This variable denotes the operating value
for the maximum VPI value that can be used for
setting up dynamic path SVPS. The operating
value can differ from the configured value (Max
VPI) as the operating value depends on the
outcome of possible ILMI based VPI range
negotiation procedure.
Vp Capability
Used to determine if this interface is capable of
supporting Switched Vps. For UNI3.x and VP
Scope Signaling Interfaces SVPs cannot be
created and hence undefined. For UNI40 & PNNI
Link Scope interfaces, if there is a non-zero VPI
range intersection with the peer, the interface is
vpCapable. If not it is notVpCapable.
NNI Proto
The NNI protocol being run on this link. Possible
options are none, ftpnni, forum-pnni, and iisp.
Accelerated Clear
Indicates whether to clear calls when carrier is
lost on the link associated with this signaling
channel or the Virtual Path goes down. The
default value is noClear. This follows the ATM
forum specification which requires the specific
signaling timers to expire before clearing the
connections. Setting this value to clearCalls will
result in the connections being torn down as soon
as carrier loss/VP failure is detected (not
compliant with ATM Forum signaling
specifications).
Vpci Group Index
The index into the VPCI Mapping Group Table to
use for this signaling interface.