Specifications

Application Views Fore Switch Application (ForeSwitchApp)
Device Management Page 65 ForeRunner ATM Switch Modules
associated signaling. If set to this value, the uni
encodes the conn_id with Non-associated
signaling bits.
Oper Sig Alloc
The operating allocation policy for a network side
uni. If set to allocVP, the network side uni will
allocate connections in its containing VP only. If
set to allocLink, the uni will allocate connections
in its containing VP and may allocate connections
in other VPS that are available to it. If set to
allocVpBundle, the uni will allocate connections it
its containing VP and a bundle of other VPs which
are pre-created.
Output Sig Upc
The Traffic Contract to be applied to the output
side of the signaling channel. If this is not
specified, signaling will be put in the vbr queue
with no bandwidth reservation and no policing.
Plan Type
The plan type to be used in calling party number
and called party number IEs in the signaling
messages. The value of this is dependent on
whether Use NativeE164 is set to enable or
disable. When Use Native E164 is set to disable,
Plant Type take a default value of unknown. All
other values are invalid. When Use Native E164 is
set to enable, Plan Type takes a default value of
international. Other valid values are national
and subscriber.
Last Change Time
The time the Signaling entity was created in
hundredths of a second.
In NSAP Filt Index
The Filter Index of the NSAP Address Filter used
to filter incoming calls. If this variable is set to
zero, all incoming calls on this UNI will be
accepted.
Out NSAP Filt Index
The Filter Index of the NSAP Address Filter used
to filter outgoing calls. If this variable is set to
zero, all incoming calls on this UNI will be
accepted.
IE Filter
Information Element Filtering Interface Options.
Opens the Q2931 Administration Table
Additional Detail View.
Additional detail