Specifications

Application Views Fore Switch Application (ForeSwitchApp)
Device Management Page 62 ForeRunner ATM Switch Modules
provide a reliable data link layer for the exchange
of Q2931 signaling messages.
ILMI Admin Stat
The desired state of the underlying ILMI status
and configuration channel.
ILMI Oper Status
The current operational state of the underlying
ILMI status and configuration channel.
AAL (ATM Adaptation Layer) Type
The AAL type that is used by this Q2931 signaling
path.
UNI Side
Determines the role this port takes in the UNI. If
this port is connected to a host using the private
UNI, it is on the network. If this port is connected
to the public UNI, this port may be required to be
the user.
Config Type
The configuration of the UNI at initialization.
Configuring the UNI to publicUNI means that this
link will be used between the switch and a public
switch. Configuring the UNI to auto means that
the operational type will be determined
dynamically. Configuring the UNI to phaseONNI
indicates that this link is used for static routing.
Oper Type
The operational configuration of the UNI.
PublicUNI is used between the switch and a
public switch. PrivateUNI is used between the
switch and a host. PhaseONNI is used between
two switches using static routing. PhaseSpansNNI
is used between two switches using SPANS
mapping messages for dynamic routing. If the
Q2931AdminConfigType is set to auto, the value
of this object may be either privateUNI or
phaseSpansNNI.
Remote IP
The IP address of the entity connected to this
port.
Entry Stat
The status of this path entry.
Q2931 Administration Table Detail
View
Access: Within the Q2913 Administration Table View,
double-click on any field entry.
ILMI Admin VCI
The VCI of the ILMI signaling channel.
Admin Min VCI
The minimum configured VCI used for SVCs.