Specifications

Application Views Fore Switch Application (ForeSwitchApp)
Device Management Page 59 ForeRunner ATM Switch Modules
VCI
The VCI of the signaling channel within the
signaling path.
Connectionless VCI
The VCI of the connectionless channel within the
signaling path.
Admin Status
The desired state of this signaling channel.
Operational
The current operational state of this signaling
channel.
Status
The status of this signaling path entry.
AAL (ATM Adaptation Layer) Type
The AAL type that is used by this Q2931 signaling
path.
CDV (Cell Delay Variation)
The switch board CDV, specified in microseconds.
This indicates the time window in which a cell
may be received on a connection and be accepted.
A cell that is received on a connections outside
the CDV window will be tagged or dropped as
indicated by the board Policing Action.
Policing Action
The Policing Action indicates the action the
switch board will take in case of a bandwidth
violation.
Remote ATM
The ATM address of the entity connected to this
port.
Remote IP
The IP address of the entity connected to this
port.
Type
The type of the signaling path connection. UNI
(User Network Interface) means that there is a
workstation on the remote side. NNI (Network
Network Interface) means there is another switch
that communicates using SPANS on the remote
side.
SPANS Status Table
This table contains the following fields:
Port
The port of this signaling path.
VPI
The VPI of this signaling path.
VCC (Virtual Channel Connections)
The number of VCCs on this signaling path.