Specifications

Application Views Fore Switch Application (ForeSwitchApp)
Device Management Page 57 ForeRunner ATM Switch Modules
NSAP Network Prefix Table
This table contains the following fields:
Port
The port of this signaling path, which is the same
as the NSAP port.
VPI
The VPI of this signaling path statistics entry.
NSAP Prefix
The network prefix used for ATM addresses that
is in effect on the user side of the ATM UNI (User
Network Interface) port.
Status
The status of this Network Prefix entry. Setting
this field to “invalid” causes this network to
disappear.
NSAP Admin Table
This table contains the following fields:
Address
Identifies the NSAP.
Mask
Identifies the mask that is used for this NSAP.
Port
Identifies the port that this NSAP can be reached
on.
VPI
Identifies the path that this NSAP can be reached
on.
State
Identifies the state of this NSAP: (1) in use, (2)
idle.
Status
The status of this NSAP address. Setting this
object to invalid causes this NSAP address to
disappear.
NSAP Topology Table
This table contains the following fields:
Board
The switch board within the ATM switch cluster.
Source
Identifies the source NSAP address of this link.
Source Mask
Identifies the mask that is used for the link
source NSAP address.
Source Port
Identifies the port that is used for the link source
NSAP address.