Specifications

Application Views Fore Switch Application (ForeSwitchApp)
Device Management Page 54 ForeRunner ATM Switch Modules
Uptime
The time since this path was created, in
hundredths of a second.
Protocol
The signaling protocol that created this path.
Channels Tables
These tables contain channel information about
the virtual paths coming in or passing through
the device. The following tables are available.
• In Channels Table
• Through Channels Table
Input Channels Table
This table shows input path status information
and allows you to create and remove paths.
Follow the procedure shown at the bottom of the
table to create and remove paths. This table
contains the following fields.
Port
The input of this channel.
VPI
The input VPI of this channel.
VCI (Virtual Channel Identifier)
The input VCI of this channel.
Status
The status of this channel.
Ports Routed
The number of output ports to which this channel
is routed.
Band. Alloc.
The allocated bandwidth on this channel, in cells
per second.
Band. Used
The bandwidth used on this channel, in cells per
second.
Uptime
The time since this channel was created, in
hundredths of a second.
Protocol
The signaling protocol that created this path.
Cells
The number of cells transferred over this channel.
Rejected Cells
The number of cells discarded on this channel.
CDV
Cell Delay Variation tolerance, in microseconds.
Policing Action
The action the device will take when there is a
bandwidth violation on this channel.