Specifications

Application Views Fore Switch Application (ForeSwitchApp)
Device Management Page 52 ForeRunner ATM Switch Modules
Originating Path Table
This table shows originating path status
information and allows you to create and remove
paths. Follow the procedure shown at the bottom
of the table to create and remove paths. This table
contains the following fields.
Port
The input port of this path.
VPI (Virtual Path Identifier)
The input VPI of this path.
Status
The status of this path entry.
Chan. Max
The maximum number of virtual channels that
can be allocated on this path.
Chan. Alloc.
The number of virtual channels currently
allocated on this path.
Band. Max
The maximum bandwidth of this path, in cells per
second.
Band. Alloc.
The allocated bandwidth of this path, in cells per
second.
Band. Used
The bandwidth used on this path, in cells per
second.
Uptime
The time since this path was created.
Cells
The number of cells transferred over this path.
Protocol
The signaling protocol that created this path.
Terminating Path Table
This table shows terminating path status
information and allows you to create and remove
paths. Follow the procedure shown at the bottom
of the table to create and remove paths. This table
contains the following fields:
Port
The output port of this path.
VPI
The output VPI of this path.
Status
The status of this path entry.
VCs (Virtual Channels)
The VCs of this path.