Specifications

Configuration Views Fore ATM Switch Configuration View
Device Management Page 38 ForeRunner ATM Switch Modules
Opens the SNMP Agent Configuration View.
Opens the Fore ATM Switch Application Trap
Destination Table view, which displays
instructions for setting destinations. For more
information on setting traps, refer to the
SPECTRUM Portable Management Application
Tools Guide.
Opens the Fore ATM Switch Alarm Table view,
which lists alarm, log, and trap action
information. For more information, refer to the
SPECTRUM Portable Management Application
Tools Guide.
Opens the Buffer Table described below.
4 The configuration view tables (Board, Module,
and Interface) are the main focus of the Fore
ATM Switch Configuration view. These tables
provide board-level, module-level, and port-
level administrative details (such as names
and addresses) and operational information
(such as signaling type, port on/off status,
port speed, and datagram size). The
configuration view tables also provide double-
click access zones and buttons that are
common to all of the tables, including the
Buffer Table. These common items are
described below, followed by descriptions of
each table.
Double Click Access Zones
Each row of data in the configuration tables
provides double-click access to a detail view,
which provides information specific to the row.
Click on any field within a row to access the detail
view for the row. The detail view accessed from
the Interface Table permits you to change the
administrative status of the selected port.
Configuration Table Buttons
Each configuration table contains the buttons
described below.
SNMP Agent
SNMP Traps
Alarms
Buffers
Sort