Specifications

Device Management Page 37 ForeRunner ATM Switch Modules
In general, you access the device configuration
views from the model type icons (ForeSwitchApp,
ForeUserApp, etc.) For these views, highlight the
model type icon and select View -> Icon
Subviews -> Configuration.
You access port-specific configuration views from
the Interface icons within the Device Interface
view. For these views, highlight the Interface icon
for the desired interface and select View -> Icon
Subviews -> Configuration.
Fore ATM Switch
Configuration View
This configuration view displays the information
listed below.
1 The Banner (within the green border area)
provides descriptive information about the
model as described in SPECTRUM Views.
2 The four fields below the Banner display the
software and hardware version numbers, the
signaling control software identification, and
the ATM address of the device.
3 The buttons are as follows:
Opens the Interface Address Translation Table.
Opens the ATM Switch Environment View, which
displays additional options for monitoring
environmental attributes.
Opens the Processor Utilization View, which
displays current, maximum, and minimum load
percentages.
Note:
Note:
You can use the mouse button (right or
middle) to access the Configuration
views. Click the icon to access the Pop-
up Navigator menu and select
Configuration.
IP Translation
Environment
Utilization