Specifications

ForeSwitchApp Interface Device View ForeRunner Interface Icon
Device Management Page 28 ForeRunner ATM Switch Modules
Figure 9: Gauge Control Panel for the
ForeSwitchApp Model Type
The Gauge Control Panel provides the following
selection panels and gauge buttons:
• Gauge Mode selection panel
• Selected Attribute selection panel
• Gauge Type selection panel
• Gauge buttons
Gauge Mode
This selection panel lets you select the type of
information shown on the Gauge label of the
Interface icon: Rates, Totals, or Percentages. The
Percentages selection displays the percentage of
the selected interface compared to the rest of the
interfaces.
The color displayed on the Gauge label depends
upon the particular mode and statistical attribute
selected. Table 9 and Table 10 list the attributes
and their corresponding colors for the Totals
mode and Rates mode, respectively.
Gauge Control Panel
Numeric
Gauge Mode Selected Attribute
Rates Load
Totals Cell (In/Out)
Percentages Discard (Out)
Error (In)
Gauge Type
Apply Keep Settings
Reset Close
Default
Rates
Table 9: Totals Mode: Attributes and
Corresponding Color
Selected Attribute Color
Octets (In/Out) Green
Cells (In/Out) Blue
Allocated Bandwidth
(In/Out)
Blue
Used Bandwidth (In/Out) Blue
Discards (Out) Gray
Errors (In) Orange