Specifications

ForeSwitchApp Interface Device View ForeRunner Interface Icon
Device Management Page 26 ForeRunner ATM Switch Modules
ForeSwitchApp Interface Icon
Subviews
This section describes the views that are
accessible from the Icon Subviews menu and via
double-click zones on the Interface icon (see
Figure 8). Table 6 lists the Interface icon device-
specific subviews menu selections.
Port Performance View
(ForeSwitchApp)
This view displays statistics for the port (Interface
icon) selected. A multi-attribute line graph shows
the port activity. You can change the graph
properties via the Graph Properties drop-down
menu and Lin/Log toggle described below. This
view also contains a table displaying transmission
statistics. Current, average, and peak values are
shown. The attributes displayed are pre-selected
and the colors used represent different statistics
as described in Table 7. Refer to the SPECTRUM
Views for more detailed information on the
Performance view.
Table 6: ForeSwitchApp Interface Icon
Subviews Menu
Menu
Selection
Description
DevTop Opens the Device Topology view described
in the SPECTRUM Views.
Port
Configuration
Opens the ForeSwitchApp Port
Configuration View (Page 43).
Port
Performance
Opens the Port Performance View
(ForeSwitchApp) (Page 26).
Port Detail Opens the Port Detail View (ForeSwitchApp)
(Page 27).
Table 7: Performance Statistic Color
Definitions
Statistic Color
In Load Green
In Cell Rate Blue
Error Rate Red
Out Load Yellow
Out Cell Rate Blue
% Discard Grey