Specifications

ForeRunner Interface Device View ForeRunner Interface Icon
Device Management Page 18 ForeRunner ATM Switch Modules
ForeRunner Interface Icon Labels
This section describes the labels on the Interface
Icon. See Figure 7.
Interface Label
This label displays the interface (port) number.
Administrative Status Label
This label displays the status of this interface for
the primary application selected (Routing, MIB-II,
etc.). The possible states are ON (Green), OFF
(Blue), and Testing (Red). Double-click this label
to open the Interface Status View (Page 21).
Interface Type Label
This label displays the interface type. All of the
devices display Other as the interface type.
Double-click this label to open the Fore Switch
Interface Configuration View (Page 21).
Description Label
This label displays the type of port signaling. This
information is also displayed in the Description
field of the Model Information view. Double-click
this label to open the Model Information view
(described in SPECTRUM Views).
MAC Address Label
This label displays the address of the device
interface. Double-click this label to open the
Interface Address Translation Table View
(Page 21).
Address Label
This label displays the address or mask. The
default is the address. Double-click this label to
open the Secondary Address View (Page 22).
To change this label’s display, do the following:
1 Double-click the label to open the Secondary
Address view.
2 Select the address you wish to display and
click OK.