Specifications

Manual Modeling Modeling Multiple Devices and Workstations
Device Management Page 118 ForeRunner ATM Switch Modules
The process of modeling multiple ForeRunner
devices is similar to the one for modeling single
devices and involves the following procedures
previously described:
1 Create the Universe level switch models.
2 Create additional GnSNMPDev workstation
models.
3 Copy the ForeUserApp model from the
workstation’s Topology view and paste it into
the ATM Network model.
4 Copy the ForeSwitchApp model from each
additional switch’s Topology view and past it
into the ATM Network model.
In the Universe level, logical pipe connections will
automatically be drawn between the new
ForeRunner models and the ATM_Network model.
Figure 21 depicts the end results of this modeling
process.