Specifications

Manual Modeling Read Me First
Device Management Page 112 ForeRunner ATM Switch Modules
Manual Modeling
This section describes the procedures for modeling single and multiple devices and workstations.
Modeling these devices involves creating a switch
model at the Universe level, creating ATM and
LAN or discrete LAN conceptual network models,
and configuring application models within the
conceptual network models.
This section includes the following topics:
• Read Me First (Page 112)
• Modeling a Single Device and Workstation
(Page 112)
• Modeling Multiple Devices and Workstations
(Page 117)
Read Me First
It is recommended that you model your network
automatically using SPECTRUM’s AutoDiscovery
feature to ensure the best modeling of your
network. (See the AutoDiscovery User’s Guide
for details on modeling your network.) Before
modeling your network, you must model an ATM
device “seed switch” within the network.
SPECTRUM uses the seed switch as a starting
point to identify the other devices within the ATM
network. Once you have discovered and modeled
your network devices manually or using
SPECTRUM AutoDiscovery, you must run ATM
Discovery. Refer to ATM Switch Discovery
Process for instructions on running ATM
Discovery from the command line.
If you choose to model your network manually,
use the procedures described in this section.
Modeling a Single Device and
Workstation
This section describes the procedure for modeling
a single device and its related applications and
conceptual models. Figure 13 provides a
conceptual overview of the modeling of a single
device and workstation (user application).