Specifications

Switching (ForeSwitchApp) Application
Path Tables
Application Views ForeRunner ATM Switch Modules
5-12 Management Module Guide
3. Click Enter and then OK.
To create or change the row after selecting it, do the following:
1. Click Create.
2. Change the applicable fields in the change view.
3. Click the right mouse button and select OK.
4. Click Validate Row and click the right mouse button to return to the
table view and see the change.
To remove the row after selecting it, do the following:
1. Click Remove.
2. Click Update. The row will be removed from the table view.
Path Tables
These tables contain Path information about the virtual paths originating
from, terminating at, or passing through the device. The following tables are
available:
• Originating Path Table
• Terminating Path Table
• Through Path Table
Originating Path Table
This table shows originating path status information and allows you to create
and remove paths. Follow the procedure shown at the bottom of the table to
create and remove paths. This table contains the following fields:
Port
The input port of this path.
VPI (Virtual Path Identifier)
The input VPI of this path.
Status
The status of this path entry.
Chan. Max
The maximum number of virtual channels that can be allocated on this path.
Chan. Alloc.
The number of virtual channels currently allocated on this path.