Specifications

Fore ATM SONET Application Configuration View
Configuration Views ForeRunner ATM Switch Modules
3-10 Management Module Guide
Fore ATM SONET Application Configuration
View
The Fore ATM SONET Application Configuration view is provided as an
example of a typical application configuration view. Your system may not have
this application (i.e., SONET OC-3) or it may have other applications (such as
DS-1, DS-2, etc.) depending on the network modules installed in your devices.
All of these configuration views provide similar information.
In general, the application configuration view provides port-specific
configuration information and allows you to change some of the transmission
parameters. Each row of data in the view provides double-click access to a
detail view that provides information specific to the row. Click on any field
contained within a row to access the detail view for the row.
The detail view accessed from the Fore ATM SONET Application
Configuration view permits you to control transmit and receive descrambling
and change the framing operator and loopback configuration of the selected
port.
The Fore ATM SONET Application Configuration view provides the following
fields:
Board
The index of this port’s switch board.
Module
The network module of this port.
Port
The number of the port within the network module.
Line Type
The line type for the interface. The possible values are Other, Single mode
short range, Single mode medium range, Multimode, UTP, or Coax. The
default is Multimode.
Line Coding
The line coding for the interface. The possible values are Other, B3ZS, CMI, or
NRZ. The default is NRZ.
Framing Default
The default value of the framing standard used by the port. The possible
values are SONET or SDH.
Framing Oper
The operational value of the framing standard used by the port. The possible
values are 1 (atm SONET) or 2 (atm SDH).
Path Width
The type of the SONET path. The possible values are sts1, sts3c, sts9c, sts12c,
sts24c, or sts48c. The default is sts3c.