Specifications

ForeSwitchApp Port Configuration View
Configuration Views ForeRunner ATM Switch Modules
3-8 Management Module Guide
ForeSwitchApp Port Configuration View
This view provides the following port specific information:
Port Number
Identifies the port.
Port Uptime
The length of time this port has been in its current state.
Port Hw Board
The hardware board number of this port.
Port Hw Module
The hardware module number of this port.
Port Hw Number
The hardware port number of this port.
Remote ATM Address
The ATM address of the entity connected to this port.
Remote IP Address
The IP address of the entity connected to this port.
ILMI Remote Address
The Integrated Layer Management Interface (ILMI) address of the entity
connected to this port. Default is 255.255.255.255.
Administrative Status
The desired state of this port. The dynamic state indicates that a link
monitoring protocol is used to determine the operational status of the port.
Operational Status
The current operational state of this port
Bandwidth In Max/Out Max
The maximum incoming/outgoing bandwidth of this port, in cells per second.
Bandwidth In Allocated/Out Allocated
The allocated incoming/outgoing bandwidth of this port, in cells per second.
Bandwidth In Used/Out Used
The incoming/outgoing bandwidth being used on this port, in cells per second.
Paths In Max/Out Max
The maximum number of incoming/outgoing virtual paths supported by this
port.
Paths In Number/Out Number
The number of incoming/outgoing virtual paths being used on this port.
The Port Configuration view also contains five buttons that access the Path
Table views described for ForeSwitchApp in Chapter 5, Application Views.