Specifications

ForeRunner Interface Device View

ForeRunner Interface Icon Labels

Device Views ForeRunner ATM Switch Modules

2-4 Management Module Guide

ForeRunner Interface Icon Labels

This section describes the labels on the Interface Icon. See Figure 2-2.

Interface Label

This label displays the interface (port) number.

Administrative Status Label

This label displays the status of this interface for the primary application

selected (Routing, MIB-II, etc.). The possible states are ON (Green), OFF

(Blue), and Testing (Red). Double-click this label to open the Interface Status

View described on Page 2-6.

Interface Type Label

This label displays the interface type. All of the devices display Other as the

interface type. Double-click this label to open the Fore Switch Interface

Conﬁguration View described on Page 2-7.

MAC Address Label

This label displays the address of the device interface. Double-click this label

to open the Interface Address Translation Table View described on Page 2-7.

Address Label

This label displays the address or mask. The default is the address. Double-

click this label to open the Secondary Address View described on Page 2-8.

To change this label’s display, do the following:

1. Double-click the label to open the Secondary Address view.

2. Select the address you wish to display and click OK.