Specifications

9031342 E5 Manual Modeling
C-7
Modeling a Single Device and Workstation
Figure C-8. Creating the SW_Link Model
16. Go into the SW_Link model by highlighting the icon and selecting View ->
Icon Subviews -> Topology (Figure C-9).
17. Create a Fanout model.
18. Highlight and Edit/Copy the Fanout model.
19. Go into the ForeSwitchApp model’s Topology view.
20. Paste the Fanout model into the ForeSwitchApp model’s Topology view
and resolve it to the proper port. The Fanout will now be green in the
SW_Link model.
21. Go into the ForeUserApp model’s Topology view.
22. Paste the Fanout model into the ForeUserApp model’s Topology view and
resolve it to the proper port.
Step 14
Step 15
ATM Network
ForeUserApp
ForeSwitchApp
X
Off-Page Reference
ForeRunner
SW_Link