Specifications

Modeling a Single Device and Workstation
Manual Modeling ForeRunner ATM Switch Modules
C-2 Management Module Guide
Modeling a Single Device and Workstation
This section describes the procedure for modeling a single device and its
related applications and conceptual models. Figure C-1 provides a conceptual
overview of modeling a single device and workstation (user application).
Figure C-1. Modeling a Single Device and Workstation Conceptual Overview
In the following procedure, the step numbers in the text correspond to the step
numbers in the illustrations.
1. Create a ForeRunner switch model at the Universe level (Figure C-2).
2. Create an ATM_Network model at the Universe level.
Figure C-2. Creating the Universe Level Models
ATM Network
ForeRunner Device
Ethernet
Workstation
(User Application)
Connection Point
LAN
ATM Network
Step 1
Step 2
ForeRunner