Specifications

9030368 E9 Performance Views
6-19
Port Performance View
SNMP NB30 Remote Port Performance View
Port Name
The name of the NB30 port. The default name is REMOTE PORT.
Network Name
The name of the network segment connected to the port.
Port Type
The type of remote port, (DSX-1) and the current setting for the Frame
Format Switch (ESF or D4). For more information on setting the Frame
Format Switch refer to the NB30 Remote Ethernet Bridge User’s Manual.
Bridge Status
The status of the bridge (ON_LINE or STAND BY).
Port Status
The current port operating status. Status messages are as follows:
NO EXT CLOCK
DCE NOT READY / NO DM
DCE NOT READY / NO CTS
LINK OK / DCE READY
NET LOOP / RED ALARM
REM LOOP / RED ALARM
NORMAL / RED ALARM
NET LOOP / YELLOW ALARM
REM LOOP / YELLOW ALARM
NORMAL / YELLOW ALARM
NET LOOP / LINK OK
REM LOOP / LINK OK
NORMAL / LINK OK
NET LOOP / LINK LOST
REM LOOP / LINK LOST
NORMAL / LINK LOST
For definitions of status messages refer to the NB30 Remote Ethernet Bridge
User’s Manual.
Channel 1 through 24
Toggle this parameter to enable or disable the selected channel.
NOTE
The Port Diagnostics and Port Configuration buttons are not available for the
V.35 and RS449 remote ports.