Specifications

Port Performance View
SNMP NB30 Remote Port Performance View
Performance Views
6-16
Cabletron SNMP Bridges
Management Module Guide
SNMP NB30 Remote Port Performance View
The NB30 Remote Port Performance View provides the following information:
Model Name
The user-defined name of the bridge model.
Network Address
The Internet Protocol (IP) address of the NB30.
Port Type
The type of remote port, (DSX-1, V35, or Rs449) and the current setting for
the Frame Format Switch (ESF or D4). For more information on setting the
Frame Format Switch, refer to the NB30 Remote Ethernet Bridge User’s
Manual.
Port Name
The user-defined name assigned to the port. The default name is REMOTE
PORT.
Port Status
The current port operating status. Status messages are as follows:
NO EXT CLOCK
DCE NOT READY / NO DM
DCE NOT READY / NO CTS
LINK OK / DCE READY
NET LOOP / RED ALARM
REM LOOP / RED ALARM
NORMAL / RED ALARM
NET LOOP / YELLOW ALARM
REM LOOP / YELLOW ALARM
NORMAL / YELLOW ALARM
NET LOOP / LINK OK
REM LOOP / LINK OK
NORMAL / LINK OK
NET LOOP / LINK LOST
REM LOOP / LINK LOST
NORMAL / LINK LOST
For definitions of status messages refer to the NB30 Remote Ethernet Bridge
User’s Manual.
This button accesses a rate graph displaying the number of received frames
over a given time frame. Gauges below the button indicate the number of
frames received by the specified port. This includes the total number of frames
received by this port since the bridge was initialized, and the difference in
frames received between the previous SpectroSERVER poll and the current
poll presented as both a total number and a dynamic horizontal bar gauge.
Frames Received