Specifications

Port Performance View
SNMP NB30 Local Port Performance View
Performance Views
6-14
Cabletron SNMP Bridges
Management Module Guide
Bridge Type
The type of bridge (e.g., CABLETRON REMOTE BRIDGE).
Bridge ID
The Ethernet (MMAC) address of the bridge.
Port Name
The user-defined name assigned to each local port. The default names are
PORT_1 and PORT_2.
Port Status
The status of each local port (ON-LINE, STAND BY, or DISABLED).
Port Type
The IEEE specification of each local port (e.g., 802.3).
Port Address
The Ethernet address of each local port.
Network Name
The name of the network segment connected to the port. The default names
are LAN-1 and LAN-2.
Max Retries
The maximum number of retries for the redundant port algorithm on the
NB30. Valid range is 2-99 retries.
Polling Interval
The time, in seconds, between SpectroSERVER polls of the network for a
specific model.
Polling Address
The polling address that will be used by the redundant port algorithm on the
NB30.
Redundancy Checking
The state of the Redundancy Enable Flag (Valid options are Enabled or
Disabled).
Active Local Port
The number of the port that is acting as the online Ethernet port on the NB30.
Default Local Port
The number of the port that is default Ethernet port on the NB30.
One additional button is available from the NB30 Local Port Configuration
View.
The Topology Settings button accesses the Port Topology Settings View.
Table 6-2 provides a list of the Port Topology Settings View fields.
Topology Settings