Specifications

Port Performance View
SNMP NB30 Local Port Performance View
Performance Views
6-12
Cabletron SNMP Bridges
Management Module Guide
This button accesses a rate graph displaying the number of received frames
over a given time frame. Gauges below the button indicate the number of
frames discarded by the specified port due to a lack of buffer space. This
includes the total number of frames discarded by the port since the bridge was
initialized, and the difference in frames discarded between the previous
SpectroSERVER poll and the current poll presented as both a total number
and a dynamic horizontal bar gauge.
This button accesses a rate graph displaying the number of discarded frames
over a given time frame. Gauges below the button indicate the number of
frames that were intended for forwarding by the specified port but were
discarded because the maximum time allowed for transmission was exceeded.
This includes the total number of frames discarded by the port since the
bridge was initialized, and the difference in frames discarded between the
previous SpectroSERVER poll and the current poll presented as both a total
number and a dynamic horizontal bar gauge.
Two additional buttons are available from the SNMP NB30 Local Port
Performance View.
The Port Diagnostics button accesses the Port Diagnostic View. The Port
Diagnostic View provides the following information:
Model Name
The user-defined name of the bridge model.
Network Address
The Internet Protocol (IP) address of the Bridge.
Bridge Type
The type of bridge (e.g., NB30).
Bridge Uptime
The time, in days+hours:minutes:seconds, since the SNMP Bridge’s network
management software was last reinitialized.
Discarded – No Buffer
Discarded – Timeout
Port Diagnostics