Specifications

9030368 E9 Configuration Views
4-9
NB20E, NB25E, and NB30 Configuration Views
EFDMIM Configuration View
This button allows an administrator to disable SpectroSERVER polls of a
device by setting Polling Status to FALSE and selecting Save All Changes
from the File menu. This is useful to disable rollup conditions for minor
network events such as a workstation power-down.
Device Configuration
This area of the EFDMIM Configuration View provides the following
information:
Bridge Name
The user-defined name of the bridge. The default is Cabletron Enet-FDDI
Bridge.
Firmware Version
The release version of the firmware installed in the bridge.
Bridge Address
The factory-set address for the EFDMIM displayed in Ethernet and FDDI
formats.
Bridge Location
The user-defined name to indicate the location of the bridge on the network.
The default location is LOCAL.
Bridge Uptime
The number of seconds since the EFDMIM was last reset or initialized.
Ring Uptime
The number of seconds since the most recent FDDI Ring oscillation. This field
resets to zero when the FDDI Ring is non-operational.
Two additional buttons are available from the EFDMIM Configuration View.
The Additional Configuration button accesses an additional EFDMIM
Configuration View, which provides the following information:
Model Name
The user-defined name of the bridge model.
Network Address
The Internet Protocol (IP) address of the EFDMIM.
Polling Status
Additional Configuration