Specifications

9030368 E9 Configuration Views
4-7
NB20E, NB25E, and NB30 Configuration Views
Device Configuration
Topology Change
Indicates if a bridge Topology change is in progress.
Topology Change Count
The number of times the bridge’s Topology Change Flag has been changed
since the bridge was powered up or initialized.
The Fwd Dly & Hello Information button accesses the Forward Delay &
Hello Information View. This view provides the following information:
Model Name
The user-defined name of the bridge model.
Forward Delay Parm
The value of the forward delay parameters when the bridge is the root or
attempting to become root. A time range of 4 to 30 seconds can be specified.
The default is 15.
Forward Delay
The time spent in the LISTENING state while moving from the BLOCKING
state to the LISTENING state, or the time spent in the LEARNING state
while moving from the LISTENING state to the FORWARDING state.
Hello Time Parm
The value of the Hello Time parameter when the bridge is the root or is
attempting to become the root. A time range of 1 to 10 seconds can be
specified. The default is 2 seconds.
Hello Time
Indicates, in seconds, the length of time the root bridge or bridge attempting
to become the root waits before resending configuration BPDUs.
The Control button accesses the SNMP Bridge Control View. This view
provides the following information:
Current Bridge Status
The status of the bridge (ON-LINE, STAND BY, or DISABLED).
Enable or disable the bridge by toggling this button.
Fwd Dly & Hello Information
Control
Bridge Status