Specifications

9030368 E9 Application Views
3-11
EFDMIM Application View
HASPART Panel
HASPART Panel
The HASPART panel provides different entries for the different bridges
modeled. For the SNMP NB20E and SNMP NB25E only one entry choice is
available. Double-clicking on the Prt_Bdg_SEnet # entry accesses an
interface specific Ethernet Port Performance View. For the NB30 there are two
valid entry choices. Double-clicking on the CSIBrdg_LPort $ entry accesses
the Ethernet Port Performance View. Double-clicking on the CSIBrdgPrtV35
$ (this could also be CSIBrdgPrtDSX depending on the port type) accesses
an interface specific Remote Port Performance View. The section titled “Port
Performance View” describes the Ethernet Port Performance View and the
Remote Port Performance View.
EFDMIM Application View
The initial EFDMIM Application View provides the Model Name, Model Type,
Network Address, Ring Table, and the HASPART Panel.
Ring Table
The Ring Table provides an ordered list and description of each node on the
FDDI Ring and provides the following information:
MAC Address
The EFDMIM FDDI MAC address.
Up Neighbor
A 6 octet canonical representation of the upstream neighbor’s address. The
upstream neighbor is the last node on the ring to receive the FDDI token
before this node.
A read-only indicator button displaying if the node is functioning as a station
or a concentrator.
Ring MACS
The number of devices on the FDDI Ring.
NonMaster
The total number of A-Ports, B-Ports, and S-Ports on the FDDI Ring.
Master Phys
The number of master ports on this FDDI Ring (from 0 to 255).
Ring Topology
The current state of the FDDI Ring. Table 3-10 shows the possible states.
Node Class