Specifications

9030368 E9 Application Views
3-5
NB20E, NB25E, and NB30 Application Views
Permanent Database
Table 3-3 lists the information provided by this area of the SNMP Bridge
Database View.
Three additional buttons are available to access the SNMP Bridge database
tables, as follows:
The Permanent Database Table button accesses the SNMP Bridge
Permanent Database Table. The SNMP Bridge Permanent Database Table
displays addresses that remain in the Source Address Table when the system
is shut down. For the NB30, there is no Port2 Out column supported, and
Port1 Out is named Filtering. The Add New Database Entry area of the
Permanent Database Table allows you to enter a new Static hexadecimal
Ethernet address into the Permanent Database. A Select Filtering button is
also provided that accesses an SNMP Bridge Filter Selection View. Table 3-4
lists the filtering options for the Static address.
Table 3-3. Bridge Database View Permanent Database Information Fields
Field Description
Current Entries The number of Static entries currently recorded in the
bridge’s Permanent Database.
Maximum Entries The maximum number of Static entries allowed in the
Permanent Database.
Database Entries Erase (set to zero) all Static entries in the permanent
database (except for the 16 [17 for the NB30]
permanent Static entries) by clicking the Erase
button. For the NB30 this also erases the entries in the
Acquired Database.
Permanent Database Table